|
Standards |
Purpose / Description |
Model |
Remarks |
|
IEC/EN/IEEE |
|||
|
IEC/EN 61000-4-2 |
Requirements for simulating Electrostatic Discharge |
16kV ESD |
|
|
IEC/EN 61000-4-4 |
Requirements for simulating EFT/Burst, on power and data and control lines |
Up to 5.0kV |
|
|
IEC/EN 61000-4-5 |
Requirements for simulating surges on power and I/O lines |
Up to 5.0kV |
|
|
IEC/EN 61000-4-5 |
Requirements for simulating surges on telecommunication lines |
AXOS 8 |
Up to 7kV |
|
IEC/EN 61000-4-8 |
Requirements for magnetic fields generated by AC power mains |
Up to 100A/m |
|
|
IEC/EN 61000-4-9 |
Requirements for pulsed magnetic fields generated by power stations etc. |
Up to 3000A/m |
|
|
IEC/EN |
Requirements for testing oscillating magnetic field. |
100kHz & 1MHz |
|
|
IEC/EN |
Requirements for voltage fluctuations of the mains (dips, variations, interrupts) |
Selectable voltage output range 0V.. 264V |
|
|
IEC/EN |
Requirements for simulating 100kHz ring wave |
Up to 7.8kV |
|
|
IEC/EN |
Requirements for simulating 100kHz and 1MHz damped oscillating wave |
Up to 3.3kV |
|
|
IEC/EN |
Requirements for simulating 100kHz ring wave and 1MHz damped oscillating wave |
Up to 7.7kV |
|
|
IEEE 1547.1 |
Standard conformance test procedures for equipment interconnecting distributed resources with electrical power systems. |
Up to 7.8kV |
|
|
IEEE 1613 |
Requirements for simulating 100kHz ring wave and 1MHz damped oscillating wave |
100kHz & 1MHz |
|
|
IEEE C37.90.1 |
Surge withstand capability for relays and relay systems |
Up to 7.7kV |
|
|
IEC/EN 60950 |
Requirements for testing safety of Information Technology Equipment |
Up to 8kV |
|
|
IEC/EN 60950 |
Requirements for surge testing on IT equipment connected to outdoor antennas |
Up to 15 kV |
|
|
IEC/EN 61010 |
Requirements for testing safety of electrical laboratory equipment |
Up to 30kV |
|
|
IEC/EN 61010 |
Insulation testing requirements 1.2/50. |
Up to 15kV |
|
|
IEC/EN 60664 |
Requirements for insulation coordination within low voltage systems |
Up to 30kV |
|
|
IEC/EN 60060-2 |
High voltage test techniques for general applications |
Up to 7.4kV |
|
|
IEC/EN 60065 |
Tests on equipment and component insulation |
Up to 15kV |
|
|
IEC/EN |
Requirements for voltage fluctuations of the mains (dips, variations, interrupts) |
AXOS 5 |
Selectable voltage output range 0V.. 264V |
|
IEC/EN |
Requirements for simulating human ESD |
16kV ESD |
|
|
ENV 50141 |
Requirements for simulating human ESD |
16kV |
|
|
EN 50178 |
Electronic equipment for use in power installations. |
8kV, 1.2/50 Voltage |
|
|
IEC 61730 |
Photovoltaic (PV) module safety qualification |
8kV, 1.2/50 Voltage |
|
|
IEC 62052-11 |
Electrical metering equipment |
ONYX 16 |
16kV ESD |
